Can Best Slurry System connect to any existing system in stone shops?

Yes. Our system injects the BestSTONE™ directly into the pit – allowing it to connect to any existing system.

Do I have to use Best Slurry System? Can't I just pour BestSTONE™ few times a day into the pit and that's it?

No. As you know, the slurry is continuously pumped from the pit, necessitating a constant addition of BestSTONE™. By maintaining this process, we ensure that every portion of the slurry comes into contact with BestSTONE™, thereby guaranteeing comprehensive treatment. This meticulous approach is pivotal in securing the highest water quality standards across our operations.

Can you reuse BestDRY™ Gel?

Yes, you can reuse SlurryDry™ gel after it has been used in core drilling. While its efficiency may decrease over time, if the gel is not dark gray, it still has absorbing potential.
You can also allow the gel to dry in a bucket after use and then reuse until Ineffective.
Disposal: Once the gel is no longer effective, dispose of it in a bag as landfill accepted waste.

If your auto scrubber or wet vac is clogged, can BestTANK™ help resolve the issue?

Yes, Fill the tank with water.
Add BestTANK™ at a rate of 1/2 cup for each 40 gallons.
Allow BestTANK™ to sit overnight.
BestTANK™ will effectively soften all the clogged slurry, restoring your machine to working condition.

Can I continued to use BestTANK™?

Yes, you can continue using BestTANK™ to maintain your machine and it also works as a flocculant – same as BestSEP™.

  • Regular use of BestTANK™ prevents clogging in the tank and keeps all pipes clean from the inside.
When would I use BestSEP vs. BestDRY?

Under 40% solids use BestSep™ Over 40% Solids use BestDRY™

How much BestSEP™ do I need to use?

Add 1-2 cups of BestSEP™ per 100 gallons of slurry and mix with a paddle mixer for 1-2 minutes to activate.

How much BestDRY™ do I need to use?

Add 1-2 cups of BestDRY™ for each 5-10 gallons of slurry. Mix until solidified, normally less than 5 minute reaction time.

How much BestTANK™ do I need to use?

Premix BestTANK™ and water for 2-3 minutes, at a rate of 1/2 cup per 40 gallons tank.
Add solution into empty recovery tank or vac drum.

Do I need to use BestSEP™ after I use BestTANK™?

YES. The BestTANK™ will prevent concrete slurry from hardening in the recovery tank. The BestSEP™ will separate slurry and water for reuse or proper disposal of excess water.

Do I need to wear protective gear when I use BestDESTROYER™?

No need – our BestDESTROYER™ has all the power of an acid with none of the hazards.

Do I need to wear protective gear when I use BestSAFE™?

Our BestSAFE™ is safe for workers. Non toxic, No VOC’s.

Can I use BestDESTROYER™ with any foamer?

Yes you can. BestDestroyer™ has the power of an acid, but without the danger of harmful acids.

What will be the fastest way to apply BestSAFE™?

Use our eFoamer: a battery-powered foam sprayer with a long-life battery providing up to 70 minutes of constant pressure, ensuring efficient and thorough cleaning for all your tasks. Experience convenience and reliability work, making cleaning sessions effortless.